This welded wire mesh with 6.0 mm wire and 20 x 20 cm openings is no longer just a mesh — it's a full-fledged reinforcing mat of the kind usually tied from individual bars. Six millimeters in diameter places it in the heavy reinforcement category, suitable for the most massive structures. The square opening provides equal strength in both directions. All intersections are automatically welded — the joints are stronger than those of tied rebar and won't come apart even under extreme vibration. The 2 x 25 meter sheet size is optimal for transport and work on large projects. The orange marking on the ends immediately signals: this is heavy artillery.
The mesh is intended for projects where standard meshes are no longer sufficient. It is suitable for reinforcing foundation slabs for multi-story buildings, industrial floors with extreme loads (foundries, crane runways, heavy-load stackers), airfield slabs, road pavements for highways with heavy truck traffic. It is also used in tunnels, retaining walls for high-grade changes, seismic-resistant structures, and special-purpose monolithic structures.
The main advantage is saving time on rebar tying. What would normally take days of work for a rebar crew can be rolled out and placed in hours. Six millimeters is a diameter at which the mesh functions as a complete rebar cage without additional bars. The orange tip is a quick reference point among thinner meshes. If a structure must withstand tons of load without cracking — this mesh is one of those solutions that are installed once and last for decades.